How to Measure a Custom Glass Railing
How to Measure a Custom Glass Railing
A custom glass railing requires the length of each section, height, angles, slopes, edge positions, and substrate details. Measuring only the total length is not enough. The position of channels, holders, joints, and possible gates must also be known.
Which dimensions should be recorded?
Measure every straight section, height from the finished floor, and the width and thickness of the supporting zone. On stairs, record the slope, treads, and start and end points. Photos from several angles help identify obstacles.
Which mistakes should be avoided?
Do not measure before finished floor levels are known. Do not round dimensions or assume all sections are identical. Check that the slab is wide enough for the selected fixing method and that services are not located in the anchoring zone.
What is the ordering process?
- Collect dimensions, photos, and requirements.
- Confirm the system, glass, accessories, and finish.
- Complete a site verification.
- Approve panel drawings or a layout.
- Manufacture the glass from confirmed data.
- Deliver, install, and check alignment.
Who should confirm the final measurements?
The team responsible for manufacturing and installation should confirm final dimensions. Self-measuring can provide an estimate, but it should not replace a site verification.
Ready to discuss your project?
Get in touch, we reply within 24 business hours.